Guide
Annual safety inspection: MEWPs, forklifts and cranes
Updated 05.11.2026
For a mobile elevating work platform, a forklift or a crane, maintenance follows the manufacturer’s manual first, and every result must be recorded (Article 32b OPA). Cranes also have their own rules: a yearly check by a crane specialist, inspections by a crane expert depending on age, and a crane logbook. Here is who checks what, how often, and how to keep the proof.
Why these machines need closer attention
MEWPs, forklifts and cranes lift loads or people. A worn brake, a stretched lift chain, a badly set load limiter or a leaking outrigger leave no margin for error. That is why operating them counts as work involving particular hazards under Article 8 OPA: the employer may only give it to trained people.
The basis is the same as for an excavator or a wheel loader. Article 32b of the Ordinance on Accident Prevention (OPA/VUV) requires work equipment to be maintained according to the manufacturer’s instructions, taking into account its use and place of operation, and the results to be recorded. Paragraph 2 adds regular checks to a plan for equipment exposed to harmful influences (heat, cold, corrosive substances), and checks after exceptional events. See our guide to the maintenance obligation for details.
The OPA does not set a single “annual inspection” date for every machine. The rhythm comes from the manufacturer’s manual and, for cranes, from specific rules.
Cranes: yearly check, crane expert and crane logbook
Cranes have their own ordinance: the Crane Ordinance (SR 832.312.15). Under Article 15, the employer has the condition of its cranes checked regularly by trained people. For mobile cranes and tower cranes, a crane expert recognised by Suva is also involved. Frequency and scope are set by EKAS/CFST directive 6511.
According to Suva, that means two levels of inspection:
- Every year: a trained crane specialist checks that mobile cranes and tower cranes are in full working order (directive 6511).
- By a crane expert, depending on the crane’s age: every 4 years up to year 20, every 2 years from year 21, every year from year 31.
- The crane logbook (Article 3 of the ordinance) goes with every crane: technical data, serial number and inspection results, in order, with date, name and signature.
- Operating a mobile crane (category A) or a tower crane (category B) requires a crane operator licence. Suva also places telehandlers in category A.
Forklifts: an interval agreed with the manufacturer
For forklifts, Suva gives no single interval. Maintenance frequency depends on operating conditions (dust, cold, outdoor work) and is best agreed with the supplier or manufacturer. The work is done by trained specialists, or by the manufacturer’s service team.
Whatever is done is recorded with the date and the initials of the person responsible in the maintenance plan, under Article 32b OPA. Suva also recommends a regular SWISSLIFTER safety inspection, shown by a sticker with the next due date.
For drivers, EKAS/CFST directive 6518 covers forklift operator training. For category R, the minimum age is 18, with a basic course followed by instruction at the workplace. A certificate from an audited training centre is valid throughout Switzerland.
MEWPs: the manufacturer’s manual and a check before each job
Suva checklist 67064/1 on mobile elevating work platforms is clear: they must be regularly checked, maintained and repaired according to the manufacturer’s maintenance instructions, and maintenance work must be recorded. The operating instructions must be on site, in the users’ language.
Many manufacturers require an annual inspection. JLG, for example, requires it no later than 13 months after the previous one. Always take the manual for your model as the reference.
Operators need basic theoretical and practical training for the category of platform they use, with a certificate, plus extra instruction for a model they do not know. Before each job, checklist 67064/2 helps check the machine and the ground on site.
Organising inspections across the fleet
Whether you run two forklifts or a fleet of hire platforms, the method is the same:
- List all your lifting equipment and keep its manuals.
- For each machine, record the due dates: services in hours, annual inspection by date, expert inspection for cranes.
- Decide who does what: daily check by the operator, maintenance by the workshop, annual check by a specialist, examination by a recognised expert.
- Keep reports, training certificates and declarations of conformity in the same place as the machine’s history.
- After a collision, an overload or a storm, have the machine checked before it goes back to work, and record it.
- A serious defect takes the machine out of service until it is repaired; the repair is recorded too.
With Godet: the due date, the report and the record
Godet is a digital maintenance log built in Valais, Switzerland, by a former construction plant mechanic. Each new machine automatically gets an “Annual safety inspection” by date and a service every 500 hours, which you adjust to the manual. You can add your own due dates, such as a crane expert inspection every 4 years.
The machine turns orange when a due date approaches and red when it is overdue, and reminders go out by email. The specialist’s report is attached to the machine record as a PDF or photo. An entry is never deleted: if it is wrong, it is withdrawn with a reason, and the full log can be printed for an inspection.
Its limits: Godet does not carry out the inspection, does not replace the specialist, the expert or the manual, and does not make your company compliant. It keeps a record of what you do. Try the 3D demo without an account or read our guide to the maintenance log; the trial lasts 15 days, with no credit card.
Frequently asked questions
Is an annual forklift inspection mandatory in Switzerland?
The OPA sets no single interval: maintenance follows the manufacturer’s instructions and the results are recorded (Article 32b OPA). Suva recommends a regular SWISSLIFTER safety inspection. For a specific case, ask Suva.
Who can carry out the annual check of a crane?
Under directive 6511, a trained crane specialist checks mobile cranes and tower cranes every year. The more thorough periodic inspections are carried out by a crane expert recognised by Suva, depending on the crane’s age.
Where are crane inspections recorded?
In the crane logbook required by Article 3 of the Crane Ordinance: results in order, with date, name and signature. According to Suva, it can be kept on paper or digitally.
How often should a MEWP be inspected?
As the manufacturer’s manual says. Many require an annual inspection; JLG no later than 13 months after the last one. Suva also advises an on-site check before each job (checklist 67064/2).
What should I do after a collision or an overload?
Article 32b OPA requires checks after exceptional events and the results to be recorded. Have the machine checked before using it again and note what was inspected and repaired.
Read next
- The construction equipment maintenance log
- Free plant maintenance log template for construction equipment (Excel)
- The construction equipment maintenance obligation in Switzerland
- Construction equipment rental software: bookings, check-out and check-in
- Excavator and construction equipment service intervals
- Construction equipment cost per hour: how to work it out